Davidstacey42 Posted October 22, 2011 Share Posted October 22, 2011 Hi all,am in the process of restoring a Mk 3 GT6 and am wondering if anyone can tell me how the wires from the heated rear screen are routed between the connectors on the screen and the connectors that are on the wires coming out by the tailgate hinges. I tried pushing them under the screen seal rubber but that didn't really work. One wire has remnants of gaffer tape on it but I don't know if this was the way they were fixed at the factory. Any ideas?Thanks,David Link to comment Share on other sites More sharing options...
John Bonnett Posted October 22, 2011 Share Posted October 22, 2011 Hello David,Here are a couple of pictures taken before I dismantled my MK3 GT6. I hope they help.regardsJohn Link to comment Share on other sites More sharing options...
Davidstacey42 Posted October 22, 2011 Author Share Posted October 22, 2011 Thanks John,It looks to me like the wire has a length of tape wrapped across it and the tape is then held in place by being trapped under the rubber. That would seem to be the way to go.David Link to comment Share on other sites More sharing options...
TimW Posted October 22, 2011 Share Posted October 22, 2011 You need to tape the wire to the tailgate before installing the rubber and glass. Link to comment Share on other sites More sharing options...
Davidstacey42 Posted October 22, 2011 Author Share Posted October 22, 2011 too late for that I'm afraid!David Link to comment Share on other sites More sharing options...
.thumb.jpeg.b15b81ef10abeea1c3039ae03c4a9f3a.jpeg)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.