Carb balancer

[Tahiti6]

Hello, I'm looking for a new carb balancer for su carbs does anyone use a synchrometer? Does it work ok and fit... I would prefer this type.

Does anyone use vacum gauges? And balance off the emission connections?

Cheers

Doug

[andytr6]

I have Carb balancer (Holts) and it works OK, but I'm not sure its any better than listening with a bit of tube.  However, for the money its piece of mind...

[Tahiti6]

Tried the tube with a small funnel at the ear end... Worked well.

Cheers Doug.

[stagnant]

Doug

I use a synchrometer, can be had for about �40 on Ebay - works extremely well with SUs.
http://www.ebay.co.uk/itm/Carburettor-Synchrometer-For-Weber-SU-Dellorto-Solex-/170893858598?pt=UK_Diagnostic_Tools_Equipment&hash=item27ca115726

[cnicholson]

I bought one of the synchrometers recently and have nothing but praise for it, if you have a PI it is a must own piece of equipment, I am considering buying 2 more so can get all three banks close to perfection

[Encom]

You can try a micromanometer, like a Testo pocket series.

I use a Airflow Developments PVM100 from work,, and hold the tube the same depth and place on each carb. Last time I had 23Pa in each.

A low range Dwyer Magnehelic gauge can also be used.