rob_lee Posted June 12, 2007 Share Posted June 12, 2007 Does anyone know if i can get a fiter like below to fit the SU carbs on my Spartan?We will be cutting the side panel so size not too importantThanks Rob Link to comment Share on other sites More sharing options...
Nigel Posted June 12, 2007 Share Posted June 12, 2007 Hi Rob I used an ITG filter on my saloon car it had very little clearence 50-60 mmbetween carbs and wing/turretcheck out their webb page you may have to drill the back plate your self .http://www.itgairfilters.com/content2.asp?section=megaflow Merlin motorsports are a stockist.Try to fit some form of ram pipe or radius to the SU'seven a small one like thesehttp://www.aptfast.com/Images_Parts/Fuel_Sytem/Billet%20Stub%20Stacks.JPGhttp://www.aptfast.com/APT_Parts/SU_Parts/a_SU_components.htm Link to comment Share on other sites More sharing options...
AndyV Posted June 12, 2007 Share Posted June 12, 2007 Update, ignore all the above just noticed you have a 6pot. Link to comment Share on other sites More sharing options...
CharlieB Posted June 12, 2007 Share Posted June 12, 2007 This may be a stupid question but what's wrong with the one in your picture? You just cut the base plate to suit?If you're using HS4s get a pair of standard MGB radiused entry plates, cheap from an autojumble (unless you have ram pipes already). Link to comment Share on other sites More sharing options...
rob_lee Posted June 12, 2007 Author Share Posted June 12, 2007 haha really didnt occure to me to make my own base plate!haha what an idiot. Thanks for your help guys.I feel a bit silly now. :( Link to comment Share on other sites More sharing options...
.thumb.jpeg.b15b81ef10abeea1c3039ae03c4a9f3a.jpeg)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.