Jump to content

won't start from ignition


Bonners

Recommended Posts

You need to do a check to identify where the problem is:
On your starter solenoid there should be two big terminals and one little one. This small one has the wire that comes from the ignition switch and should energise when you turn said switch to the starting position. With a multimeter (or if unavailable 12v bulb) check that there are 12v relative to earth at this terminal when your assistant tries to start the engine.
If there are 12v then the problem is with the solenoid or its earthing and if not its the ignition switch or associated wiring.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...