Nick Jackson (2) Posted March 27, 2010 Share Posted March 27, 2010 I was looking at my GT6 engine bay this morning and found this electronic module wired to the coil. See pic's below. There's no wire from the bottom terminal to anywhere but this could have come off during it's 4 years out of use. The distributor is on points so that seems to rule out electronic ignition. Any ideas what this module is and what it's for? Sorry about the quality but the only camera I had to hand was my phone and the light was terrible. Link to comment Share on other sites More sharing options...
Nick Jackson (2) Posted March 27, 2010 Author Share Posted March 27, 2010 Another pic Link to comment Share on other sites More sharing options...
thescrapman Posted March 27, 2010 Share Posted March 27, 2010 I think that was your resistor for a 6V coil.I have seen that type previously.CheersColin Link to comment Share on other sites More sharing options...
Nick Jones Posted March 28, 2010 Share Posted March 28, 2010 I agree - ballast resistor.Nick Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.