Jump to content

Bonnet on 13/60 - broken stiffener


Recommended Posts

I have been trying to align the bonnet again and have noticed that on the right side when in the open Position, that it is much looser than the left side. Then I noticed that the right Hand stiffener is broken and has had attempts to weld it in the past.

I find it difficult to determine from either Canleys or Rimmers diagrammes what the component is. 😩. It appears to be tack welded on to the back side of the front grille and there are two bolts for Fixing to a plate welded on to the "Bonnet hinge plate assembly". Could this be part number 704087 ? (canleys say that this is only for a 1200) or is it 611292? 

I suppose I will probably have to make a piece myself anyway as both are non available.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...