GreenV8Machine Posted August 20, 2015 Share Posted August 20, 2015 do the bonnet buffers have anything to do with setting the rear height of the bonnet. My bonnet seems high on one side and low on the other. where would bonnet buffers go? Quote Link to comment Share on other sites More sharing options...
Rod 2500S Posted August 20, 2015 Share Posted August 20, 2015 Yes they do, they fit as shown in the pic Quote Link to comment Share on other sites More sharing options...
Ridgetone Triumph Posted August 20, 2015 Share Posted August 20, 2015 Those look aftermarket The original ones were placed further up near the end of the screen 😉 Or they are Australian ones Quote Link to comment Share on other sites More sharing options...
GreenV8Machine Posted August 20, 2015 Author Share Posted August 20, 2015 mine looked something like these http://www.ebay.co.uk/itm/PAIR.....?hash=item4d2a2b2885 Quote Link to comment Share on other sites More sharing options...
Ridgetone Triumph Posted August 20, 2015 Share Posted August 20, 2015 Here you go, originals And sit here Quote Link to comment Share on other sites More sharing options...
nicmk1est Posted August 20, 2015 Share Posted August 20, 2015 i second ridgetone picture,mine had the same...my2p Quote Link to comment Share on other sites More sharing options...
Rod 2500S Posted August 21, 2015 Share Posted August 21, 2015 Yep RWB brand Made from some scrap clip on boot rubber strip with some 4mm rubber fuel tube inside the hollow tube to reinforce it, works a treat for nothingCheersRod Quote Link to comment Share on other sites More sharing options...
.thumb.jpeg.b15b81ef10abeea1c3039ae03c4a9f3a.jpeg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.