cbjroms Posted May 20, 2012 Share Posted May 20, 2012 I am trying to refit the Stromberg CD150 carburettor to my 13/60 engine and cannot work-out how the thottle and choke cables are fitted. I think there must be some brackets for the manifold that I need to put into place first?I would be really gratefull if someone could post a picture of their carb in position and connected up so that I can see what I need to do.ThanksChris Link to comment Share on other sites More sharing options...
Zendervision Posted May 20, 2012 Share Posted May 20, 2012 I used to have a better quality picture than this but I can't find it. Anyway arrowed in red is the bracket which should be sandwiched between the two manifolds. This diagram on Canley's website explains the detail of how it goes together. Link to comment Share on other sites More sharing options...
Zendervision Posted May 20, 2012 Share Posted May 20, 2012 ...and here's the choke, which is much simpler. Link to comment Share on other sites More sharing options...
cbjroms Posted May 20, 2012 Author Share Posted May 20, 2012 Thanks Zendervision,My carb seems to have some sort of rod hanging off the throttle linkage?Chris Link to comment Share on other sites More sharing options...
Zendervision Posted May 20, 2012 Share Posted May 20, 2012 These are the bits you should have (plus that bracket), is the rod this one? Link to comment Share on other sites More sharing options...
cbjroms Posted May 21, 2012 Author Share Posted May 21, 2012 Yes, thats the rod and I can see how it goes together now. Think I know where the bracket is but not sure about the nipple end for the throttle cable!ThanksChris Link to comment Share on other sites More sharing options...
.thumb.jpeg.b15b81ef10abeea1c3039ae03c4a9f3a.jpeg)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.