Rotaflex wishbone bracket

[Richard B]

Having trouble positioning the bracket in the correct location.

Dimension B (courtesy of Canley Classics) same measurement as No. 68 in my GT6 workshop manual 5.6"

Now going back to my old TD days that is a plan view of the chassis and so I would expect the measurement to be to the shock absorber bracket on the top. Not to the sloping panel that supports the bracket. Bloody difficult to measure though.

I have access to another chassis with brackets already fitted, buy they look a lot closer to shock absorber supports.

[GT6 M]

Rich, div,nae  weld it fully on, or even tack it on,
untill ye got the suspension in spot, and the radius arms,

the thing in my mind, findings, does no need to be verticle, BUTT, inclined.
Diffs inclined forads, so spring is inclined forads,  so too will the VL,
so attach the lower link, wot will that be sitting at,

Verticle,or inclined,!!!

M

[Deleted User]

Richard , doing this very job myself at the moment, 140mm measurement, however I have had several people do a measurement for me and the factory settings can be well out and different to their original spec.

I can take pics and measurements if req? Just need to do some alterations on my diff upper spring bracket then reposition before final fix.

Rob