811500 Posted June 25, 2007 Share Posted June 25, 2007 Hello AllI need to replace the clutch master cylinder on my Spit 1500. I have spoken to a couple of suppliers who now supply an alternative to the original which is less expensive. The problem is that the fluid reservoir is at a right-angle to the cylinder as opposed to being set at an angle of approx 45 degrees as on the original. This of course means that the reservoir would stand at the wrong angle once the cylinder is fitted to the angled bracket.I am told by the suppliers that these replacements work ok but I'm not sure. Has anyone fitted one of these replacements and were there any problems with its operation ?. I hope I've explained this clearly.ThanksJamie Link to comment Share on other sites More sharing options...
GT6Steve Posted June 25, 2007 Share Posted June 25, 2007 I use these on the racer and they work fine. You lose some fluid capacity with the tilted body but that's not a problem. Only thing is it will look a bit of a bodge perhaps. Maybe not though since it'll be sitting next to the big brake master cylinder? Just be sure to get the same diameter. Link to comment Share on other sites More sharing options...
Deleted User Posted June 25, 2007 Share Posted June 25, 2007 post removed on request of author Link to comment Share on other sites More sharing options...
.thumb.jpeg.b15b81ef10abeea1c3039ae03c4a9f3a.jpeg)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.