Carb linkage

[Martin66]

have loaded 2 photos of the linkage rod between the 2 carbs which have gone into my gallery. However when the long link is in position, their is no movement for the throttle ! as if the link rod should be some 1” longer. The link rod i have is 3.75” long

Hear from you soon,

Cheers Martin

[Howard]

Martin

No photos and which triumph engine are they on?

Cheers

Howard

 

 

[Guppy916]

Sorry you can't post photos because your not a paid up member, the same as me

[Beans]

You can post pictures as a non CT member. 

Upload your pictures to a photo hosting site and "Ctrl_C"& "Ctrl_V" the link in your post 😉

 

[Beans]

Quote

Quoted from Martin66-

have loaded 2 photos of the linkage rod between the 2 carbs ...

[Howard]

If its the linkage rod for the twin SU TR7 this is the replacement part you need:-

https://www.ebay.co.uk/itm/Throttle-Linkage-Rod-For-Triumph-TR7-With-SU-Carbs-Adjustable-Plated-EN1A-Steel/352022927502?epid=12008339829&hash=item51f633988e:g:T9YAAOSwmZdalr5u

Hope this helps

Howard

 

[Graham1]

Hello

You set up does not seem correct, there should be a pipe between the carbs which from memory crosses above the linkage. I think the metal pipe is fitted the wrong way round. Sorry my GT6 is in he garage and I can't readily get I out to check. But I feel the metal pipe is incorrectly fitted. Are the carbs the same as I think hey should be a paired. 

Graham

Ps if I get chance will check, but have you googled picture of GT 6  delco carbs which you have.