Doig Posted January 26, 2007 Share Posted January 26, 2007 Whats the easiest way to go about doing this.Do I need an engine hoist to support the engine while I change the mounts or is there an easier way? Link to comment Share on other sites More sharing options...
Deleted User Posted January 26, 2007 Share Posted January 26, 2007 Jack on the REAR of the sump (as far back as you can go) undo one mount at a time replace then do the next one,should be 1/2 hour job if all goes well,but there are some duff "new" mounts out there that might need the holes re-drilled! Link to comment Share on other sites More sharing options...
aaron77 Posted January 28, 2007 Share Posted January 28, 2007 All I did put a jack under the engine backplate/bellhousing. worked fine with no damage Link to comment Share on other sites More sharing options...
Deleted User Posted January 28, 2007 Share Posted January 28, 2007 yep that would work Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.