Jump to content

Hazard Warning light location Mk 2


Martins Stag

Recommended Posts

George That is who I have used. The challenge is I needed to find the existing Hazard flasher unit. On investigation this afternoon it appears that it is behind the shelf below the glove box.

On the off chance I just changed the turn flasher unit and then changes out the indicator bulbs  and the hazards worked on the old flasher unit.

 

So all sorted

 

Martin 

Link to comment
Share on other sites

The location of both flashers is shown on the drawing in the Rimmers web site:-

https://rimmerbros.com/Item--i-GRID005358

You will need either electronic flashers on both hazard & indicator circuits or to fit a 6.8 Ohm 50W resistor in parallel with each LED bulb. (If you have a problem obtaining them, I purchased mine from Rapid Electronics for £12.37 for 4 including postage two years ago.)

Cheers

Howard

 

Link to comment
Share on other sites

Martin

Glad to be of assistance.

I prepared a completely new wiring diagram for my '81 7 and have been digging through the complexities & shortcomings of Triumph wiring diagrams to find out exactly how the circuits work. In the process I have been trawling the obscure parts of the Internet for data on items (Pektrons & intermittent wiper delay relays to mention two) and consequently have discovered where to look for information.

Cheers

Howard

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...