markythesparky Posted November 9, 2014 Share Posted November 9, 2014 just replaced gearbox on my 1500 and noticed that there was no shim behind the spacer on starter motor dose it need one? on all part lists it says bendex adjuster shim but no size Quote Link to comment Share on other sites More sharing options...
junkuser Posted November 9, 2014 Share Posted November 9, 2014 You can either blue the Bendix gear and use the starter or measure the distance of the ring gear from the face where the starter mounts and the equivalent on the starter with the Bendix in the fully extended position (and the retracted position for clearance) and calculate. Quote Link to comment Share on other sites More sharing options...
markythesparky Posted November 13, 2014 Author Share Posted November 13, 2014 how much should the ring gear and bendix mate, without a shim it mates about 80% of the ring gear Quote Link to comment Share on other sites More sharing options...
junkuser Posted November 13, 2014 Share Posted November 13, 2014 If the components are to original specifications you should be able to get 100% with even a little to spare on the Bendix gear without clearance problems in the dis-engaged position Mark.This will give more even loading and wear on the teeth.Mal. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.