hyperhale Posted January 12, 2015 Posted January 12, 2015 Looking for feedback on wiper blades for my mk4 spit as the current s steel TEX brand arm doesn't sit fully against the windscreen on the drivers side - last 3 inches to frame due to curve on windscreen.Tried bending but can't get any tension on the blade to hold it down.Only had the spit a short time so have little experience of this issue.Is this common or will a new arm resolve this , ideally want to stay with stainless steel if possible ? Quote
Velocita Rosso Posted January 12, 2015 Posted January 12, 2015 Most cars are the same...a common problemIf you bend the blade/arm to suit curve....it will not wie clean when on the flat Quote
WIMPUS Posted January 12, 2015 Posted January 12, 2015 All normal on a spit ! :PMy passenger one (so for UK/RHD cars the drivers side ) it doesn't wipe that good and they are new bosch ones Quote
.thumb.jpeg.b15b81ef10abeea1c3039ae03c4a9f3a.jpeg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.