Curtis1360Barry Posted October 29, 2011 Share Posted October 29, 2011 Hihas anyone had any experiance with this http://www.ebay.co.uk/itm/320780660614?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649 as i need to remove one of my hubs or another way of doing it possibly Cheers Curtis Link to comment Share on other sites More sharing options...
herald948 Posted October 29, 2011 Share Posted October 29, 2011 That, or an original Churchill tool (of which this is more or less a copy) is what you want. Basically, there is no other (safe, foolproof) way of doing the job! Link to comment Share on other sites More sharing options...
dar Posted October 29, 2011 Share Posted October 29, 2011 Item number: 190592923720try this one first you may get it cheeper, thay are not that hard to make made mine out off angle iron and a good nut and boult Link to comment Share on other sites More sharing options...
Curtis1360Barry Posted October 29, 2011 Author Share Posted October 29, 2011 ok cheers guys may have a bid on the original churchill one :) Link to comment Share on other sites More sharing options...
dar Posted October 29, 2011 Share Posted October 29, 2011 if you dont get one, i can send you a pic of mine if you are interested in makeing one, never had eny problems with it works fine cost les than a fiver Link to comment Share on other sites More sharing options...
Curtis1360Barry Posted October 29, 2011 Author Share Posted October 29, 2011 if ya dont mind mate Link to comment Share on other sites More sharing options...
nicmk1est Posted October 29, 2011 Share Posted October 29, 2011 hi dar,,,could you post the picture of the puller so we could all see it? if thats ok with you :) Link to comment Share on other sites More sharing options...
MarkB Posted October 29, 2011 Share Posted October 29, 2011 Hi allHere are a couple of pics of s puller I made many years ago from an old Spit front Hub. Simple and never failed to work yet. I have posted this before when the subject was raise a year or so ago. Nut and bolt needs to be very beefy.Mark Link to comment Share on other sites More sharing options...
dar Posted October 29, 2011 Share Posted October 29, 2011 hope this works Link to comment Share on other sites More sharing options...
dar Posted October 29, 2011 Share Posted October 29, 2011 one more Link to comment Share on other sites More sharing options...
Curtis1360Barry Posted October 29, 2011 Author Share Posted October 29, 2011 cheers mate. ill get me dad to go to the metal merchants next week and ill have ago at making one :) Link to comment Share on other sites More sharing options...
dar Posted October 29, 2011 Share Posted October 29, 2011 93 wrote:Hi allHere are a couple of pics of s puller I made many years ago from an old Spit front Hub. Simple and never failed to work yet. I have posted this before when the subject was raise a year or so ago. Nut and bolt needs to be very beefy.Mark mark. i think it was me and you posted pics last time Link to comment Share on other sites More sharing options...
dar Posted October 29, 2011 Share Posted October 29, 2011 curtis, i used 5mm thick angle iron,cheeper to make one spend money on you car Link to comment Share on other sites More sharing options...
Curtis1360Barry Posted October 29, 2011 Author Share Posted October 29, 2011 yh every little bit i can save will help :) Link to comment Share on other sites More sharing options...
Curtis1360Barry Posted October 29, 2011 Author Share Posted October 29, 2011 Dar, what is the width if the angle iron? cheers mate Link to comment Share on other sites More sharing options...
dar Posted October 30, 2011 Share Posted October 30, 2011 40mm is the width of the angle iron, if you dont have extra wheel nuts,and use the ones off your car then use them up side down not to damage the cone Link to comment Share on other sites More sharing options...
.thumb.jpeg.b15b81ef10abeea1c3039ae03c4a9f3a.jpeg)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.