garyb Posted July 3, 2008 Share Posted July 3, 2008 When converting rear suspension from fixed spring to later swing spring, can a spring raising block between the diff and the spring be used to lower the ride height (with similar effects) as used on fixed spring installations?ThanksGary Link to comment Share on other sites More sharing options...
Clive Posted July 3, 2008 Share Posted July 3, 2008 yes. Link to comment Share on other sites More sharing options...
garyb Posted July 3, 2008 Author Share Posted July 3, 2008 Thank you! Link to comment Share on other sites More sharing options...
Pete Lewis Posted July 3, 2008 Share Posted July 3, 2008 dont forget to check the rear wheel toe in after fitting the block as it will changedue to the angular change to the tie rods Peter Link to comment Share on other sites More sharing options...
Clive Posted July 3, 2008 Share Posted July 3, 2008 Worth running without the block initially, just to get a feel for the change. And remember if you use a block you may well need extended studs to fit the spring.And lastly do not forget the front ARB MUST be fitted too.Clive Link to comment Share on other sites More sharing options...
.thumb.jpeg.b15b81ef10abeea1c3039ae03c4a9f3a.jpeg)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.