Stu 1986 Posted April 29, 2013 Share Posted April 29, 2013 Hello,Just a quick question. I have had my door glass polished and am ready to put it back in the car. I have forgotten which way round they went though. I noticed the glass channels are shaped in a certain way, to me this looks like left and right. Which is which though?ThanksS. Quote Link to comment Share on other sites More sharing options...
Pete Lewis Posted April 30, 2013 Share Posted April 30, 2013 ns/os glass are the same, the rearmost silent channel has the two lower angle brkts pointing inwards C/O canley http://www.canleyclassics.com/?xhtml=xhtml/diagram/herald1360doorassembly.html&xhtmlcatalogue=xhtml/catalogue/herald1360.html&category=bodyandfittings&xsl=diagram.xslPete Quote Link to comment Share on other sites More sharing options...
Stu 1986 Posted May 1, 2013 Author Share Posted May 1, 2013 Thanks for the reply, but it was the part circled in red in the picture I was referring to. It has little lips on the bottom edge of the metal and was wondering which way round they went.Ta, S. Quote Link to comment Share on other sites More sharing options...
Pete Lewis Posted May 5, 2013 Share Posted May 5, 2013 you picture shows them facing outwards is as the cantilever slide fits on the inboard side of the slide (well memory is a bit distant on that )Pete Quote Link to comment Share on other sites More sharing options...
Stu 1986 Posted May 5, 2013 Author Share Posted May 5, 2013 Thanks Pete, the picture doesn't show up too well on my own pc but the same picture is in the workshop manual. I successfully fitted the glass yesterday, and the doors are now fully complete. :) Thanks for your help,S. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.