Adrianb Posted October 16, 2020 Share Posted October 16, 2020 Hi all, The panel on the bulkhead that the clutch and brake master cylinders and pedals attach on my restoration project is not available and is as rare as hens teeth.Can anyone provide me with a template and some measurements so I can fabricate a panel.Many thanks Adrian Quote Link to comment Share on other sites More sharing options...
foshi Posted October 18, 2020 Share Posted October 18, 2020 not worth cutting out of a scrap car Quote Link to comment Share on other sites More sharing options...
Adrianb Posted October 18, 2020 Author Share Posted October 18, 2020 Hi, All options are open to me within the constraints of being partially sighted and this COVID thing as also been shielding my daughter since last January.Ideally a panel would be good but the challenge of fabricating from a template would be more exiting! Quote Link to comment Share on other sites More sharing options...
foshi Posted October 18, 2020 Share Posted October 18, 2020 if your not in a rush can cut the section out of my spares car for you Quote Link to comment Share on other sites More sharing options...
Adrianb Posted October 18, 2020 Author Share Posted October 18, 2020 Hi that would be good off you,can you pm me to go thru details thanks Quote Link to comment Share on other sites More sharing options...
Adrianb Posted October 18, 2020 Author Share Posted October 18, 2020 Hi that would be good off you,can you pm me to go thru details thanks Quote Link to comment Share on other sites More sharing options...
foshi Posted October 19, 2020 Share Posted October 19, 2020 Quoted from Adrianb- Hi that would be good off you,can you pm me to go thru details thanks hi if you can post a picture of what you need can check mine is ok paul Quote Link to comment Share on other sites More sharing options...
Adrianb Posted October 19, 2020 Author Share Posted October 19, 2020 This is the panel I am looking for the flat panel where the clutch and brake cylinders attach Quote Link to comment Share on other sites More sharing options...
Adrianb Posted October 19, 2020 Author Share Posted October 19, 2020 Quoted from Adrianb- This is the panel I am looking for the flat panel where the clutch and brake cylinders attach Quote Link to comment Share on other sites More sharing options...
foshi Posted October 20, 2020 Share Posted October 20, 2020 Quoted from Adrianb- Quoted from Adrianb- This is the panel I am looking for the flat panel where the clutch and brake cylinders attach ok think that part is ok will check on saturday and let you know Quote Link to comment Share on other sites More sharing options...
foshi Posted October 24, 2020 Share Posted October 24, 2020 Quoted from foshi- Quoted from Adrianb- Quoted from Adrianb- This is the panel I am looking for the flat panel where the clutch and brake cylinders attach ok think that part is ok will check on saturday and let you know had a look , prod with a screwdriver not that good sorry paul Quote Link to comment Share on other sites More sharing options...
Adrianb Posted October 24, 2020 Author Share Posted October 24, 2020 Hi was your panel good enough to make draw a template which. You could mail to me Quote Link to comment Share on other sites More sharing options...
Adrianb Posted October 24, 2020 Author Share Posted October 24, 2020 Hi was your panel good enough to make draw a template which. You could mail to me Quote Link to comment Share on other sites More sharing options...
Adrianb Posted October 24, 2020 Author Share Posted October 24, 2020 Hi was your panel good enough to make draw a template which. You could mail to me Quote Link to comment Share on other sites More sharing options...
foshi Posted October 25, 2020 Share Posted October 25, 2020 Quoted from Adrianb- Hi was your panel good enough to make draw a template which. You could mail to me will be ok for that ,would be a bit awkward to form the mouldings ect if you can wait would be better to cut out the part and send to you paul Quote Link to comment Share on other sites More sharing options...
Adrianb Posted October 25, 2020 Author Share Posted October 25, 2020 Hi Paul,There’s no rush as The herald needs lots to be done before that panel is replaced,keep in touch.Adrian Quote Link to comment Share on other sites More sharing options...
foshi Posted October 25, 2020 Share Posted October 25, 2020 Quoted from Adrianb- Hi Paul,There’s no rush as The herald needs lots to be done before that panel is replaced,keep in touch.Adrian ok you may need more panel parts then let me know Quote Link to comment Share on other sites More sharing options...
.thumb.jpeg.b15b81ef10abeea1c3039ae03c4a9f3a.jpeg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.