blueH Posted January 2, 2007 Share Posted January 2, 2007 Hopefully I can obtain some help from the Forum, I need to replace the Fuel Line on my Herald, currrently body off car so just got chassis with 4 wheels & engine, unfortunately I did'nt remove original fuel line but I have got a new Automec kit ready to fit, would dearly love to get a photograph of the layout from Fuel Pump through to where it runs from front of chassis, my kit has a short copper length which obvoiusly goes into fuel pump think this should bend 90deg then rubber hose then long length half way down chassis (does this bend out from chassis at front for hose to fit)Any assistance would be appreciated & a photo/photos would be fab.Norm Link to comment Share on other sites More sharing options...
valencia1 Posted January 3, 2007 Share Posted January 3, 2007 can only suggest refer to a parts manual for an exploded view of fittings!regards, bryan Link to comment Share on other sites More sharing options...
blueH Posted January 4, 2007 Author Share Posted January 4, 2007 Thanks for the suggestion Bryan, does anyone know whether this information is available in either Herald Parts book/Workshop Manual or perhaps Maintenance Manual, I don't currently have a Triumph produced Book so any assistance from anyone who owns above would help enormously.Thanks AgainNorm Link to comment Share on other sites More sharing options...
.thumb.jpeg.b15b81ef10abeea1c3039ae03c4a9f3a.jpeg)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.