John Bonnett Posted May 12, 2016 Share Posted May 12, 2016 I don't know if there were originally drain holes in the corners of the tailgate aperture but without them water does collect in the corners. So I've put a couple in and they appear to work well. Just in case anyone else might be interested in doing the same; a couple of photos. Quote Link to comment Share on other sites More sharing options...
RedRooster Posted May 12, 2016 Share Posted May 12, 2016 Garage queen never sees the rain, unless it's Le Mans of course....RR Quote Link to comment Share on other sites More sharing options...
Nick Moore Posted May 12, 2016 Share Posted May 12, 2016 Nice idea John. Although my GT6 hasn't seen rain in years, water does collect there after washing it. In fact I washed the tailgate this morning as one of our garage lizards had taken a dump on it. The lizards keep the Redbacks under control but their poo is corrosive Water was also getting into the tailgate, but I put grommets in the top holes and drilled drain holes in the bottom. It was almost as if Triumph wanted the car to rust! Quote Link to comment Share on other sites More sharing options...
byakk0 Posted May 13, 2016 Share Posted May 13, 2016 you mentioned in your build thread but I don't recall you having posted pics.Interesting for sure. Quote Link to comment Share on other sites More sharing options...
John Bonnett Posted May 13, 2016 Author Share Posted May 13, 2016 These are the only pictures Hazen. Although it was in my plans it got forgotten and not remembered until the car was already at the painters. I machined the drain tubes and the painter welded them in. It is a good mod and does work. Quote Link to comment Share on other sites More sharing options...
john2502 Posted May 13, 2016 Share Posted May 13, 2016 Good little mod that, as the GT6 lives on the drive and is now back to being used every day I can confirm this happens a lot. haha. Quote Link to comment Share on other sites More sharing options...
byakk0 Posted May 14, 2016 Share Posted May 14, 2016 where did you run the drain tube to? Quote Link to comment Share on other sites More sharing options...
John Bonnett Posted May 14, 2016 Author Share Posted May 14, 2016 Quoted from byakk0 where did you run the drain tube to? The tubing itself is 6mm running to a plastic T piece and out through a hole in the valance. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.