Rubce Posted February 17, 2013 Share Posted February 17, 2013 Hi All. Can any of you give advice on how to go about removing the rear tailgate spring and hinge mechanism on a Mark 3 GT6? I need them out of the way to attend to some rust. Thanks Bruce Quote Link to comment Share on other sites More sharing options...
cook1e Posted February 17, 2013 Share Posted February 17, 2013 The hinges and spring all come out as an assembly. Undo the 6 bolts attaching the tailgate to the hinge assembly. Disconnecting the rear heater connectors as you go.Take the cover off the interior lamp, disconnect the connectors, and take off the plastic hinge cover.Remove the 8 bolts attaching the hinge/sprong assembly to the body and take out the assembly as a unit. Quote Link to comment Share on other sites More sharing options...
Rubce Posted February 17, 2013 Author Share Posted February 17, 2013 So the springs don't require compressing? Quote Link to comment Share on other sites More sharing options...
GT6 M Posted February 17, 2013 Share Posted February 17, 2013 Nope, Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.