Mr Happy Posted April 17, 2017 Share Posted April 17, 2017 Hi all I've just removed my old (twin) choke cable and fitted a single cable to my Holley carb. Can anyone advise on how to refit the choke cable switch.I couldn't really see how it was fitted to the original cable. Any advice would be appreciated.ThanksLB Quote Link to comment Share on other sites More sharing options...
StagNL Posted April 18, 2017 Share Posted April 18, 2017 Attached via a clip that you slide over the switch.At least on mine it was and it looked very factory-ish. Rather fiddly, hence the reason I ended up not refitting it.Julian Quote Link to comment Share on other sites More sharing options...
pollystag Posted April 18, 2017 Share Posted April 18, 2017 [url][/https://goo.gl/images/oP2Cg0][img][/img]Do you mean the switch that illuminates the choke on light? Quote Link to comment Share on other sites More sharing options...
Richard B Posted May 5, 2017 Share Posted May 5, 2017 If you can get a single cable from a 2000, 2.5S or a Dolomite, that will have the fittings to take the choke light switch.Not PI's as they have a twin choke. Quote Link to comment Share on other sites More sharing options...
.thumb.jpeg.b15b81ef10abeea1c3039ae03c4a9f3a.jpeg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.