GigGleR Posted July 3, 2007 Share Posted July 3, 2007 We are just in the process of fitting an oil cooler to my Mk1 2000 Estate (with the 2.5 lump in it) and I was just wondering if anyone had any recommendations as to where to mount the rad? just can't seem to find anywhere that quite right yet.Any thoughts? ??) Link to comment Share on other sites More sharing options...
Richard B Posted July 3, 2007 Share Posted July 3, 2007 Install the cooler inside the front valance; run the hoses through the bulkhead by the expansion bottle. Link to comment Share on other sites More sharing options...
Mj17 Posted July 3, 2007 Share Posted July 3, 2007 Inside the front valance is where the factory oil coolers went (and very Victorian hospital radiator it is too). Link to comment Share on other sites More sharing options...
gilesdive Posted July 3, 2007 Share Posted July 3, 2007 I've seen some people mounting it behind the bottom of the main radiator (not on a Triumph though). Not the brightest idea, as it then gets hot air blowing over it and so won't cool the oil very well. I'm sure you wouldn't do anything daft like that! Link to comment Share on other sites More sharing options...
.thumb.jpeg.b15b81ef10abeea1c3039ae03c4a9f3a.jpeg)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.