Tom2000 Posted November 14, 2010 Share Posted November 14, 2010 Under two weeks ago I pulled the spits engine for a blown head gasket, ended up pulling the entire engine, refurbed cylinder head (unleaded conv), new camshaft, gaskets and a set of new rings (although they were fine but worth checking eh?). The headgasket has been sealed and the head torque settings checked, at the moment I've filled the engine with 20W50, is this too thick, should I be running something thinner? Link to comment Share on other sites More sharing options...
willcolumbine Posted November 14, 2010 Share Posted November 14, 2010 20/50 is the factory spec - so it should be all good! :) Link to comment Share on other sites More sharing options...
.thumb.jpeg.b15b81ef10abeea1c3039ae03c4a9f3a.jpeg)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.