daver clasper Posted May 2, 2017 Share Posted May 2, 2017 HiCan this wheel be turned until it just stops at the end of it's range (or will it come apart).Any help great please.thanks Dave Quote Link to comment Share on other sites More sharing options...
davidb5964 Posted May 2, 2017 Share Posted May 2, 2017 On mine turning clockwise it comes to the end, the other way has a c clip on the threaded rod near the end, this stops it. If the c clip is missing as mine was it all falls apart, I learnt that the had way Quote Link to comment Share on other sites More sharing options...
poppyman Posted May 2, 2017 Share Posted May 2, 2017 hi dave, it should just stop. unless someone has forced it in the past?but if it does fall off its easy to put back together.cheers, tony. Quote Link to comment Share on other sites More sharing options...
Casper Posted May 2, 2017 Share Posted May 2, 2017 Quoted Text a c clip on the threaded rod near the end, this stops it. http://www.mgexp.com/pictures/8096.jpg#utm_source=alias&utm_medium=mgexperience.netYou can see the clip here.I recently posted this, but it's 10 clicks per degree, 4 degrees per division (at the crank)C. Quote Link to comment Share on other sites More sharing options...
daver clasper Posted May 2, 2017 Author Share Posted May 2, 2017 Thanks, that's brill.Have always set by the timing by the "back off from pinking" by turning the diz, though I guess finer adjustment can be done by the vernier.Anyone know what the amount of range of the vernier is in degrees at the crank.Cheers, Dave Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.