Alex Posted October 17, 2011 Share Posted October 17, 2011 I'm getting to the bit where i paint the biggest bit of my car now,its also what started all this!Firstly should i stand it up so the paint flows down the panel?Should it be painted in sections or in one go?What do i do with outer seams,should i seam seal them?Any other advice?CheersAlex Link to comment Share on other sites More sharing options...
Spitfire1500 Posted October 17, 2011 Share Posted October 17, 2011 Hi Alex,If it were me, I would personally have the bonnet positioned in the same way it was on the car. Use a lot of thin coats and allow at least 20-25 minutes per coat.If you tip up the bonnet, you risk causing paint runs - especially with thicker coats and I have a number of paint runs on my Spitfire where I have rushed it and tipped panels the other way up or applied coats too thickly.Kind regards,David Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.