roger.england Posted September 2, 2006 Share Posted September 2, 2006 My Vitesse has had a front ender at some stage which has compressed the bend in the bonnet hoop. To compensate, and get a reasonable bonnet fit, the hinge bracket has been extended downwards for the location of the pivot pin - hardly the most professional route to repair. However, I suspect that removing to hoop and trying to bend it to the right shape will not be easy and may distort it even more. Are these hoops available anywhere as new or NOS, or has anyone any other suggestions please? Quote Link to comment Share on other sites More sharing options...
slate Posted September 2, 2006 Share Posted September 2, 2006 complete bonnet for sale on ebay £20.00 Item number: 170023880681 Quote Link to comment Share on other sites More sharing options...
Jason Posted September 2, 2006 Share Posted September 2, 2006 Find a rotten Herald or Vitesse bonnet and take one out of that - they are all the same I think Quote Link to comment Share on other sites More sharing options...
roger.england Posted September 3, 2006 Author Share Posted September 3, 2006 Just managed to find a hoop Jason - without the bonnet - thanks. Quote Link to comment Share on other sites More sharing options...
Matt306 Posted May 5, 2014 Share Posted May 5, 2014 My herald has the same problem, i think but i cannt spot it that easily. I am having terrible trouble trying to fit the bonnet to the O/S. The near side fits a treat but I know the O/S has had a bump as the front chassis extension was bent. That has been pulled back out but the bonnet gap is large so on the adjuster i tighten it which allows me to latch the bonnet with a 1cm (maybe more) gap but i cannt raise the bonnet then to go over the overider....Any clues? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.