tictor Posted February 15, 2013 Share Posted February 15, 2013 hi guys!it appears that i somehow lost the washer that fits right before the sloted nut on the diff pinion.On rimmer website it says Washer - Repair - 9/16 inch, what means repair?On canley the part number is WP22 and is no longer available.Do you know the thickness of this washer?Because i really don't want to pay 100 quid for a spare diff just to get this damned washer.but i know i shouldn't have lost it in the first place! Quote Link to comment Share on other sites More sharing options...
That Man Posted February 16, 2013 Share Posted February 16, 2013 According to the information i have Washer "WP 0022" is listed as "washer plain light" inside diameter 9/16" outside diameter 1" it doesn't give a thickness though, so I'd guess the same as a standard 9/16" washer.http://www.canleyclassics.com/?xhtml=xhtml/diagram/hardwarewasherplainlight.html&xhtmlcatalogue=xhtml/catalogue/appendix.html&category=hardware&xsl=diagram.xslGordon Quote Link to comment Share on other sites More sharing options...
Velocita Rosso Posted February 16, 2013 Share Posted February 16, 2013 Yes WP0022 is correct.....Its a standard washer that I would be able to measure by taking my old,stored, one off Quote Link to comment Share on other sites More sharing options...
tictor Posted February 16, 2013 Author Share Posted February 16, 2013 Thanks guys, and velocita i'll wait till you tell me the tickness of WP0022 Quote Link to comment Share on other sites More sharing options...
Velocita Rosso Posted February 16, 2013 Share Posted February 16, 2013 I" od x 9/16" id x 3/32" thick....OK? Quote Link to comment Share on other sites More sharing options...
tictor Posted February 16, 2013 Author Share Posted February 16, 2013 great thx! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.