Jump to content


Recommended Posts

Yes is the short answer
Passenger seat out/fob removed
Radio support out
Tunnel out
Undo prop at front
Remove starter motor
Undo clutch slave cylinder
Undo gear box tail
Remove speedo drive
Undo bell housing
Jack up rear of engine to take strain then eventually lift it to lift gbox tail from prop
Remove bell housing and gearbox and wiggle like fury to remove gearbox and bell housing
....and there is the clutch, remove from flywheel and replace
Reinstall in reverse

Link to comment
Share on other sites

2356 wrote:
Dunno about the overdrive, but it's easy enough without. Gearbox tunnel cover out from the inside. Drop the propshaft off completely and then undo the seven hundred and forty two bolts around the bell housing. Off it comes from inside the car :)

Blimey.... and I thought the Vitesse had a lot of bolts  :P


Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...