CharlieB Posted March 11, 2010 Share Posted March 11, 2010 Could anyone tell me the correct diameter & tolerance for the cam followers?My Haynes says 0.7996-0.8000" or 20.294-20.320mm which the sharp eyed will see is not consistant!My original Spitfire manual has nothing to say on the subject.The reason I ask is I have bought 2 sets of followers from 2 different suppliers & 12 out of 16 of them seem to be oversize, I don't want them sticking in the block.Perhaps an older original manual will reveal the truth?Also who can supply quality followers?Charlie Link to comment Share on other sites More sharing options...
99176 Posted March 11, 2010 Share Posted March 11, 2010 Tappets 0.7996 - 0.8000 Bore in block 0.8002 - 0.8009 Link to comment Share on other sites More sharing options...
CharlieB Posted March 12, 2010 Author Share Posted March 12, 2010 Thanks, the ones I have are 8.0005-6 so not good! Link to comment Share on other sites More sharing options...
Paudman Posted March 12, 2010 Share Posted March 12, 2010 Item number 370344982134 on eBay.I've bought two sets off this guy in the past and they're original stock, all a good fit in the block. Link to comment Share on other sites More sharing options...
CharlieB Posted March 12, 2010 Author Share Posted March 12, 2010 Thanks, they're certainly cheap! I'll talk to the supplier of the others first then decide what to do.I wonder how many manufacturers of followers there are or if they all come from the same one? Link to comment Share on other sites More sharing options...
esxefi Posted March 12, 2010 Share Posted March 12, 2010 charlie what are you measuring them with?thats increments of .1 of 001"perhaps i need some newer verniers/micrometer. :-/ Link to comment Share on other sites More sharing options...
CharlieB Posted March 12, 2010 Author Share Posted March 12, 2010 Micrometer. I only started to measure them because they were tight in the block Link to comment Share on other sites More sharing options...
CharlieB Posted April 2, 2010 Author Share Posted April 2, 2010 If anyone's interested Canleys sorted me out with some correct size followers :)Should have gone there in the first place. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.