Jump to content

changing auto to manual wiring  


love

Recommended Posts

The J-type OD should run straight off the feed to the reversing light switch, which is hopefully what also goes through that connector block. Other thing that goes through it is the inhibitor switch for the starter, which will need a loop fitting as you no longer need it.

It may be easiest to get hold of the correct connector, and graft it onto the end of the J-type sub-loom to match up to the main car loom.

Or change both sides to bullets.

I don't have a Stag wiring diagram to hand, so can't give you specific colours to connect together.

Cheers

Colin

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...