Andy89 Posted June 19, 2012 Share Posted June 19, 2012 I have a pair of corbeau alpine seats that I want to fit in my 1500 spitfire, I've come to the conclusion that I'm going to have to mount them directly To the floorpan so I can actually fit in the car without my head rubbing on the roof! I'm having trouble working out how to drill holes through the floorpan in the right though, does Anyone have any tips or tricks To locate where to drill ? Quote Link to comment Share on other sites More sharing options...
Alex Posted June 19, 2012 Share Posted June 19, 2012 Ive got corbeau classics fitted in my car(not for much longer as just rebuilt standard seats so selling the buckets).I used cortina seat runners as theyre very low,this enabled me to have some fore and aft adjustment.This also meant bolting to the floor was simple.....you could mark out the holes on cardboard/hardboard then transfer it across! Quote Link to comment Share on other sites More sharing options...
Andy89 Posted June 19, 2012 Author Share Posted June 19, 2012 Thanks for that alex, any particular mark of cortina seats? Quote Link to comment Share on other sites More sharing options...
Alex Posted June 19, 2012 Share Posted June 19, 2012 Mine were mk3,however I would think all the later cortina's would use the same as the floor pans are identical.They are basically flat sliding runners and only about 10-15mm deep so add very little height.Good luck Quote Link to comment Share on other sites More sharing options...
.thumb.jpeg.b15b81ef10abeea1c3039ae03c4a9f3a.jpeg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.