Jump to content

Sienna PI

Club Member
  • Posts

    102
  • Joined

  • Last visited

Everything posted by Sienna PI

  1. Hi all! I have had a confirmation to my email address saying i have paid £00.00 to the club and cannot see my entry on the list - should i retry entering again does anybody know?!!! Cheers!
  2. Guilty - good way to stop and chat to folks about which spark plugs to use! Nick,thanks for stopping and your help and advice ( on more than one occasion )!
  3. Many thanks Wim, After breaking down and withdrawing from an earlier 10CR thats great news to hear, Cheers!
  4. I have just read the 2015 Regulations;my understanding is that the date for withdrawal is 31st July if contact is received beforehand. " Refunds for the withdrawal of entry will be made if received prior 31st July 2015. " Could someone clarify this position please?
  5. I have just read the 2015 Regulations;my understanding is that the date for withdrawal is 31st July if contact is received beforehand. " Refunds for the withdrawal of entry will be made if received prior 31st July 2015. " Could someone clarify this position please?
  6. Many thanks Sheepy! Having broken down (Gearbox failure ) in Germany (10CR 2011), this would take  a lot of stress out of an unfortunate situation!
  7. Hi! Thanks for the info Don - I'll have to suffer sharing with the Mrs - (not into wasting hard earned cash for extra rooms!). Cheers!
  8. Hi! Many,many thanks to all your responses especially GT6 M -your photos are invaluable and made it quite clear for me. I rang the garage today (that pressed on the new bearings etc) and they are happy for me to take the Diff' to them to check the problem (Fingers crossed!) 8) Cheers!
  9. Hi All! Please forgive my ignorance but where are crews getting their information about which towns etc to book hotels in? Cheers.
  10. Hi! Thanks very much for your responses - Yes I have tightened the castle nuts tight and am thinking that they have not  pressed the new bearings etc. on fully by the garage I took them to. Here is a photo of the nearside.
  11. Hi All! I have just had new bearings and seals fitted to the Input axles on my diff' - after bolting them back into the unit I have noticed that there is a gap between the bearing retainer and the "cup" on the end of the flange on both sides (approx 2mm on offside and about 5mm on nearside)... i)  should there be a gap here? ii) or should the cup fully cover the bearing retainer? iii)the gap is larger on the nearside - should they have the same gap either side? Cheers, Sienna PI.
  12. michael_charlton wrote: Majority going the night before...........nearly all hotels fully booked with CT crowd Hi! Do you mean hotels near the start or further en route? Could anyone suggest Hotels for the over night stops please?! Many thanks.
  13. Is anyone crossing on the 5th? - (I am looking at booking with Just Ferries for the 6am Dover to Calais).
×
×
  • Create New...