FlyinPhil Posted November 22, 2008 Share Posted November 22, 2008 Hi Anyone know where i can get a head gasket to fit my 2300cc overbored GT6? The standard Payen gasket fouls the top of the piston. Link to comment Share on other sites More sharing options...
willcolumbine Posted November 22, 2008 Share Posted November 22, 2008 I'm not totally aware of what's available for the sixes. It may be that there is a gasket available for overbored cars but to me it sounds like you might have to have a copper one made from somewhere like http://www.ferriday.co.uk/ Link to comment Share on other sites More sharing options...
GT6Craig Posted November 22, 2008 Share Posted November 22, 2008 ive got a mate who can make em up using his waterjet cutter. But he will need the material and pattern then he can cut out anything up to 10mm!if that helps Link to comment Share on other sites More sharing options...
Alex Posted November 22, 2008 Share Posted November 22, 2008 Chris wittor? Link to comment Share on other sites More sharing options...
Richard B Posted November 23, 2008 Share Posted November 23, 2008 Try CW, CC, Jigsaw, Enginuity etc. I know they're not cheap. Link to comment Share on other sites More sharing options...
GT6Craig Posted November 23, 2008 Share Posted November 23, 2008 I reckon my mate would do a copper gasket for £30 Link to comment Share on other sites More sharing options...
FlyinPhil Posted November 23, 2008 Author Share Posted November 23, 2008 Thanks for the info guys, I've got found a few people that could possibly make a copper one, but to GT6 - wouldn't mind having the contact details of your friend to have a chat to him about it if poss?CheersPhil Link to comment Share on other sites More sharing options...
Tim Bancroft Posted November 23, 2008 Share Posted November 23, 2008 Racetorations sell Copper Head gaskets, no idea of price. Link to comment Share on other sites More sharing options...
GT6Craig Posted November 23, 2008 Share Posted November 23, 2008 Hes called James 07921862238. Tell him Craig told you to call about head gaskets. He will need the old gasket, or at least an original one in good order - he will scan it in to the computer, then just increase the cylinder hole size to whatever you tell him to.Its worth a phone call anyway, as i said, you may need to send him some gasket material up, its a little difficult for him to obtain the material as he doesnt cut metal that much - he actually cuts floor tiles!Hope that helps Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.