HERALD RUSTBUSTER Posted March 28, 2007 Share Posted March 28, 2007 Hi AllHas anyone ever re skinned a Herald door (my passenger door is 40 percent filler) ::) and if so how difficult is it and how much is the skin likley to be.Cheers ......Herald Rust Buster Link to comment Share on other sites More sharing options...
roger.england Posted March 28, 2007 Share Posted March 28, 2007 Door skin is about £80 (plus VAT). Had one done on my Vitesse recently but got an expert to do it! Link to comment Share on other sites More sharing options...
wfarnworth Posted March 28, 2007 Share Posted March 28, 2007 I've emailed you an article I scanned a while ago from the Courier on door reskinning.Hope it helpsWayne Link to comment Share on other sites More sharing options...
heraldcoupe Posted March 28, 2007 Share Posted March 28, 2007 Before cutting your door, lay the new skin over the top and make sure the swage lines and door handle locations match up. I have encountered one or two mis-pressed skins which looked OK until fitted, but made panel alignment impossible.There have also been cheap and cheerful aftermarket doorskins produced in the past. Avoid these at all costs, beware of suspiciously cheap old-stock skins in grey finish!Cheers,Bill. Link to comment Share on other sites More sharing options...
Matt Mason Posted March 28, 2007 Share Posted March 28, 2007 Hi ive lost count of how many door skins ive done , and as they go herald ones are very easy ( no upper frame to do like modern cars). If You P.M me, i'll give you my phone number and i will talk you thru the process and the tools you will need. If you live near north yorkshire i would fit them for you its not a long job.Matt Link to comment Share on other sites More sharing options...
.thumb.jpeg.b15b81ef10abeea1c3039ae03c4a9f3a.jpeg)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.