Biffter Posted May 5, 2006 Share Posted May 5, 2006 I am a new owner of a stag..(1 year) car has come back from full paint and am having problems getting doors and boot lid to line up with new rubber sils.. could anyone advise please..... Link to comment Share on other sites More sharing options...
shenderson Posted May 9, 2006 Share Posted May 9, 2006 I had a real job getting the front doors to line up correctly with new seals - also from Rimmer's. It was largely a case of adjusting the upper window frame of the door, as well as the door hinges and striker, until the door closes correctly.It helps to have a trolley jack or similar to support the weight of the door and adjust its height when the hinge mountings are slackened off.I got good results - eventually! I don't think there was any problem with the quality or design of the seals, it just takes a lot of hard work.Good luckSteve Link to comment Share on other sites More sharing options...
.thumb.jpeg.b15b81ef10abeea1c3039ae03c4a9f3a.jpeg)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.