bond68 Posted June 21, 2019 Share Posted June 21, 2019 Is there a special tool to tighten the locking ring on the fuel tank? Ray Quote Link to comment Share on other sites More sharing options...
RobPearce Posted June 21, 2019 Share Posted June 21, 2019 Small hammer and an old screwdriver Quote Link to comment Share on other sites More sharing options...
Paudman Posted June 22, 2019 Share Posted June 22, 2019 I'll add to Rob's advice slightly: an old blunt screwdriver, or a good flat-ended punch. Too sharp of a point will deform or cut into the ring, and with some of the cheaper repro versions you can cut into the metal before it will tighten fully. Quote Link to comment Share on other sites More sharing options...
Antonnick Posted July 1, 2019 Share Posted July 1, 2019 i had an adjustable tool , intended to remove and tighten the locking plate on a portable electrik grinder i.e it has two studs which when set at its widest Point it is just large enough to fit inside the locking ring. I think it is manufactured by Wolf Tools. Works very well. Quote Link to comment Share on other sites More sharing options...
.thumb.jpeg.b15b81ef10abeea1c3039ae03c4a9f3a.jpeg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.