stevegt6 Posted April 5, 2014 Posted April 5, 2014 Morning... Need helpCannot get the clips over the seal enough to bite properly and keep seal where it should be... I have the appropriate tool, but maybe i am just trying it in wrong way or something...Last attempt ended in drivers door having to be painted again :(I have the correct clips (checked several times) - but to me, the clips used for the inner seal seem much better and easy to install.Any help very much appreciatedCheersSteve Quote
hypoid53 Posted April 5, 2014 Posted April 5, 2014 Steve, there should be small depressions in the seal to mark where the clips go. These make the seal thickness a little thinner for the clips to bite. I find dropping the door glass from the regulator pins and lowering to the bottom of the door makes the job easier. Here is a pic of the seals and different types of clip. :) Quote
stevegt6 Posted April 5, 2014 Author Posted April 5, 2014 Helpful piccie, thanks...I have same clips, but my seals do not have any depressions/recesses ....and i think this set of seals was from CC's - but not 100%New set of seal then from another supplier in first instance....rather than try and trim out recesses myself (bound to go wrong that one)I have done same with glass.CheersSteve Quote
stevegt6 Posted April 8, 2014 Author Posted April 8, 2014 ok...ordered new seals with the clip recesses - from JP's....cant think why i didnt get the others from there...Anyway, lets hope they make for easier work when they arrive :) Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.