Engine valance

[jeepstertim]

Are the herald and vitesse engine valances interchangable?

[Elma fud]

Have a look on rimmer website and see if they are the same part number ;)

[garyf]

They're different, the Vitesse ones are longer and shallower?

I suspect you can't fit Herald ones to a Vitesse, but I've never tried?

Reckon the one on the Inlet/Exhaust side would foul the Carbs & Air Cleaner :-/

Regards

Gary

[Casper]

The radiator is way further forward on a Vitesse, too
C.

[jeepstertim]

yes thank you, have done the rimmer part nos check and they are different.  Any ideas who may stock them, Rimmers are out, Canley too.

[heraldcoupe]

New ones aren't made, though you might get lucky with NOS at shows, ebay etc.
What's up with the old ones?

Cheers,
Bill.

[jeepstertim]

Unfortunately it didn't come with any and I want to use this year round, i'm guessing their fairly key to keeping crud off the engine and bulkhead.

[thescrapman]

I'm sure I have a pile of Herald and Vitesse valneces somewhere.

I guess you want Vitesse.

Cheers

Colin