blueH Posted January 26, 2007 Share Posted January 26, 2007 I know is probably a bit of a long shot but I was wondering if anyone in Triumph Herald land may have at some time have recovered from a scrapped Herald an Inner Valance Rubber Seal, this Seal is actually stapled to the Inner Engine Valance it's approx 1.5" wide and 11.5" long. The Seal prevents damage/rubbing between the valance and the bulkhead, mine on just one side is ripped the other side is perfect and as my bulkhead is off the car now is the perfect time to replace.I have tried a few places including Rimmers Plus there's a set on Ebay but there not the same as my original, so if anyone can help that would be fantastic.Norm Link to comment Share on other sites More sharing options...
davidcourier Posted January 26, 2007 Share Posted January 26, 2007 just use bicycle innertube with stainless steel staples...worked on my courier, looks very nice Link to comment Share on other sites More sharing options...
Deleted User Posted January 26, 2007 Share Posted January 26, 2007 buy a new one acashonaly on ebey as that nice little scotish place which does some nice little bits great for when you want one bit, names chick doing or something similar. Link to comment Share on other sites More sharing options...
Einar Posted January 26, 2007 Share Posted January 26, 2007 James Paddock, www.jamespaddock.co.uk, supplied me with what they called "glazing rubber" which is perfect for the job at £3.00 per metre. Fitted very well on my engine valances. Link to comment Share on other sites More sharing options...
Deleted User Posted February 2, 2007 Share Posted February 2, 2007 http://cgi.ebay.co.uk/Triumph-Vitesse-Herald-GT6-Spitfire-engine-valance-seal_W0QQitemZ130075959734QQihZ003QQcategoryZ27383QQrdZ1QQcmdZViewItem Link to comment Share on other sites More sharing options...
.thumb.jpeg.b15b81ef10abeea1c3039ae03c4a9f3a.jpeg)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.