Abboracing Posted July 11, 2016 Share Posted July 11, 2016 Hi Guys, I am trying to tune my GT6 and want to start with the ignition timing. What is the stroboscopic setting. I cannot find my manual but have read online that 10 BTDC static and 4 ATDC strobe.Is that correct? I have never set a car to ATDC with a strobe Quote Link to comment Share on other sites More sharing options...
nang Posted July 12, 2016 Share Posted July 12, 2016 I'd tend to set it by ear. Rotate the dizzy until it seems to idle right. Take it for a run , if it pinks, retard it slightly until it doesn't. If it doesn't advance it a bit. Trial and error. use highest octane rating you can get. >Tony. Quote Link to comment Share on other sites More sharing options...
drofgum Posted July 12, 2016 Share Posted July 12, 2016 Abboracing,ATDC timing is for emissions and only with vacuum retard connected. Tony's advice is good. Regards, Paul Quote Link to comment Share on other sites More sharing options...
.thumb.jpeg.b15b81ef10abeea1c3039ae03c4a9f3a.jpeg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.