zhcj Posted June 26, 2010 Share Posted June 26, 2010 the clutch on my vitesse 6 bites high, which could mean i know its on its last legs. however it could be the adjustment i think how do you adjust the clutch so the bite point is lower on a vitesse 6 pleasethanks Link to comment Share on other sites More sharing options...
Steve Cureton Posted June 26, 2010 Share Posted June 26, 2010 There is no adjustment possible. You can bodge it but that only delays the inevitable, plus you have to put right your bodge too. Link to comment Share on other sites More sharing options...
Richard B Posted June 26, 2010 Share Posted June 26, 2010 907 wrote:how do you adjust the clutch so the bite point is lower on a vitesse 6 pleaseBecause its a hydraulic clutch, its self adjusting. 8) Link to comment Share on other sites More sharing options...
zhcj Posted June 26, 2010 Author Share Posted June 26, 2010 yes thanks new clutch then or imminent new clutch Link to comment Share on other sites More sharing options...
Pete Lewis Posted June 28, 2010 Share Posted June 28, 2010 if its a coil cover, the disc has to be thicker than a diaphragm unit, if it has a worn out disc or the wrong disc the take up will be late, as the disc wears the clamp load reduces( you start to slip) and the pedal load goes up, Pete Link to comment Share on other sites More sharing options...
.thumb.jpeg.b15b81ef10abeea1c3039ae03c4a9f3a.jpeg)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.