Neilriser Posted December 13, 2017 Share Posted December 13, 2017 Hi to all,i need your assistance yet again if i may,i have just rebuilt the boot floor but when offerer it in it appears to wide? i unfortuantly have lost my dimentions and now cant trim it to the correct width.As it tapers from front to back i need to get it right,please does anyone have the measurements of the exact width from just behind the arches and the width from boot rim so i can trim to correct size? Neil Quote Link to comment Share on other sites More sharing options...
Steve AKA vitessesteve Posted December 13, 2017 Share Posted December 13, 2017 Take a look at my blog post: http://vitessesteve.blogspot.co.uk/2015/05/fitting-vitesse-body-to-chassis.html which includes a couple of sources for chassis shape and dimensions. Your boot floor needs to fit your particular car. Our cars precise shape and size varies a bit between specimens. How much of the rest of the rear of your car is left - photos would make it easier to understand your problem. Quote Link to comment Share on other sites More sharing options...
animator Posted December 13, 2017 Share Posted December 13, 2017 Mine is 136cm just behind the wheel arches and 129cm from corner to corner level with the boot rim. Quote Link to comment Share on other sites More sharing options...
Neilriser Posted December 14, 2017 Author Share Posted December 14, 2017 Many thanks for replies and thanks animator for measurements,my floor was over size causing the new boot floor side panels to conect to the wings at a strange angle? have now trimed boot floor to correct size and now fits well so many thanks again.Regards Neil Quote Link to comment Share on other sites More sharing options...
.thumb.jpeg.b15b81ef10abeea1c3039ae03c4a9f3a.jpeg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.