TR7th Heaven Posted November 18, 2012 Share Posted November 18, 2012 Another question I'm afraidDad is struggling to remove the distributor on his TR7. Is there a knack to it? It seems to be in a really awkward place. He'd like to remove it so he can strip, clean and rebuild it with new points etc 'on the bench' rather than is situ. Is this advisable as it's so awkwardly placed?Thanks again,Rich ;) Quote Link to comment Share on other sites More sharing options...
Beans Posted November 18, 2012 Share Posted November 18, 2012 It's actually not that bad to remove, it just needs some practise and the proper tools.Over the years I found that either a small 7/16" ring spanner with the ring at a slight angle from the handle,Also a so called starter spanner will do the job quite nicely Quote Link to comment Share on other sites More sharing options...
.thumb.jpeg.b15b81ef10abeea1c3039ae03c4a9f3a.jpeg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.