CharlieB Posted April 6, 2007 Share Posted April 6, 2007 How do I measure the various mainshaft endfloats? I can't get the fealer gauges in with it all assembled so am I supposed to put the bushes on the shaft without the gears first? The manual just says measure but not how! I think I must be missing something obvious.Single rail by the way.Charlie Link to comment Share on other sites More sharing options...
Deleted User Posted April 6, 2007 Share Posted April 6, 2007 post removed on request of author Link to comment Share on other sites More sharing options...
Deleted User Posted April 6, 2007 Share Posted April 6, 2007 post removed on request of author Link to comment Share on other sites More sharing options...
CharlieB Posted April 6, 2007 Author Share Posted April 6, 2007 Well by putting parts on the shaft & taking them off again several times I've measured all except 1st gear & I can do that with it fully assembled. Everything is within tolerance so far so if only I had that circlip I could probably finish the job. Maybe a trip to Moss tomorrow.Glad I started this, very satisfying! (am I sad?)Charlie Link to comment Share on other sites More sharing options...
CharlieB Posted April 7, 2007 Author Share Posted April 7, 2007 Moss came up trumps with the circlip but I still need one more bit (a new oil thrower) to finish the job. I so wanted to get it done this weekend, have to find something else to play with now! Link to comment Share on other sites More sharing options...
.thumb.jpeg.b15b81ef10abeea1c3039ae03c4a9f3a.jpeg)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.