Jump to content

Encom

Recommended Posts

Must be the Gearbox season - anyway 2nd gear in the Vitesse sounds like noisy tappets when coasting along lightly loaded. 3rd same sound just not as loud. 4th no worries, perfectly quiet.

I have noticed the 2nd gear noise has gotten allot more pronounced over the past couple of weeks.

So question being, what's knackered? how bad will it be if I keep driving on it?


Link to comment
Share on other sites

Most likely the mainshaft spigot tip bearing has failed hence quiet in 4th
mainshaft may  be scrap now.
its the weakest part of the gearbox

layshaft spindles , sliding sleeve springs, mainshaft bronze bushes , input and output bearings
all have  have inputs to the wear and tear

many gears are past their  life and fatigue failures

Mike papworth does a good rebuild with an 18mm spigot which has some life in it

This dolly mainshaft and modified input shaft

pete8

pete

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...