flying_fox Posted November 25, 2011 Share Posted November 25, 2011 HelloI purchased a SAP plastic gear box cover which is advertised for both Vitesse and GT6 and "the best" this is incorrect as far as I can deduce. The moulding bulge bottom right "drivers side" additional to taking width out of the foot well leaves a gapping hole beneath it Do I assume other users just blank this off when used in a Vitesse?The fibre glass item fitted when I purchsed the car is also a bad fitting itemAny help/ info / comments will be welcomeThanks GB Link to comment Share on other sites More sharing options...
Casper Posted November 25, 2011 Share Posted November 25, 2011 Never heard of problems to this extent. As it's a Vitesse, I assume it's on a Mk 2 chassis. It wouldn't fit a Mk 1, but then neither would the 2 litre engine.C. Link to comment Share on other sites More sharing options...
mikeyb Posted November 25, 2011 Share Posted November 25, 2011 I'm sure a GT6 is different too! Where do SAP covers come from? Link to comment Share on other sites More sharing options...
.thumb.jpeg.b15b81ef10abeea1c3039ae03c4a9f3a.jpeg)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.