ferny Posted August 26, 2012 Share Posted August 26, 2012 Does anyone know a source for the clips which hold the trim below the badges on the boot lid? It's the outer ones I need with a nut on. Or, does anyone know what they look like? Or, have a couple they don't need? :) Quote Link to comment Share on other sites More sharing options...
jollyj54 Posted August 29, 2012 Share Posted August 29, 2012 I found a slim bolt that slotted in the trim and used that. Worked a treat.However - how on earth do you get all the plastic push fit fasteners pushed in!!!!J Quote Link to comment Share on other sites More sharing options...
ferny Posted August 30, 2012 Author Share Posted August 30, 2012 Ta, that makes sense and I'll use some stainless ones so they don't rust up at badly!As the the plastic, no idea but mine didn't look to be all the way in before I took it off anyway! Quote Link to comment Share on other sites More sharing options...
Tim_343 Posted September 1, 2012 Share Posted September 1, 2012 Ive took my trim off to treat the rust and am yet to re fit it fully but the best way i found when i done a test refit was hook the bottom of the strip under the lip on the boot then push upwards over each of the clips seemed to push them in securely (i assume by the fact when i let go it stayed) lol hope this helps Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.