cbjroms Posted January 20, 2015 Share Posted January 20, 2015 Good afternoon,I am replacing the wheel studs on my 13/60 with the longer Freelander versions and understand that I will need to pull the hubs off to make the change.Don't know whether to buy a puller and then sell it on or borrow one.Anyone in Southampton area got one that I could borrow for a few weeks?ThanksChris Quote Link to comment Share on other sites More sharing options...
nang Posted January 20, 2015 Share Posted January 20, 2015 You could drill a hole in the backing plate and fit them that way.Tony. Quote Link to comment Share on other sites More sharing options...
warphi1970 Posted January 21, 2015 Share Posted January 21, 2015 nang wrote:You could drill a hole in the backing plate and fit them that way.Tony.like your way of thinking and no possible damage to bearings :) Quote Link to comment Share on other sites More sharing options...
Mark Hammond Posted January 21, 2015 Share Posted January 21, 2015 And then fill the hole with a grommet afterward.Mark Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.